The non-woven chemical protective coveralls with an elastic hood are intended for short-term protection against chemicals. Material: Non-woven, 70% polypropylene and 30% polyethylene.A zipper with cover flap protects against contaminants. Elastic sewn-in rubber bands at the edge of the hood, at the waist, at the cuffs and at the ends of the legs ensure freedom of movement. Antistatic.Use: chemical protective coveralls are designed for use in situations where the wearer is likely to be exposed to a limited amount of chemical splashes and toxic dust. We recommend using in the following cases: for protection against asbestos, acid splashes from alkaline materials and water. For maximum protection, we recommend that the wearer uses solvent-resistant tape on the sleeves and lower leg ends wear a mask attached to the hood of the suit with the same tape. Application: in food industry, sanitary-hygienic work, high-tech work, industry.Standards: – EN ISO 13688:2013 – Protective clothing. General requirements – EN ISO 13982-1:2004+A1:2010 – Protective clothing for use against solid particulates. Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5) – EN 13034:2005+A1:2009 – Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6) – EN1149-5:2018 – Protective clothing. Electrostatic properties. Part 5: Material performance and design requirements
